Skip to main content

Posts

Atlanta Cosplay Meetup: Group Build Update #1

The Atlanta Cosplay Meetup is a bi-monthly-ish group of cosplayers, prop builders, and costume makers hosted at Freeside Atlanta. We have been meeting since October 2014 to share ideas and projects. In November we began discussing an idea about making a group costume - something we could all work on, and eventually wear, together - and how we could make that into a reality. After a lot of debate (and a little help for Rachel who had already made her own Xenomorph costume!) we settled on making a Colonial Marines and Xenos group from the Aliens franchise. We just recently wrapped up our 3rd group build, so let's recap what we've done so far. Our first build we focused on planning and various ideas of what we wanted to do and how we wanted to get there. We decided to use Pepakura to laser cut cardboard as the rough master for our Marine's armor, and to 3D print some of the detail parts as well as their various weapons. Pepakura is a program that takes a 3D object

January Build-Out Recap

On Saturday, we had one of our semi regular facility build-outs. These are great for the space and our members as it lets us focus on working on the space itself as a project to improve and maintain Freeside. This time we did a lot of cleaning up and tidying after some of the major projects at Freeside! Between the JAM build the past few months and the recent power additions, a lot of organization work was needed. Demontre and Niels put some more time into the indoor paint booth! Not much left on this project now, all we need is the exhaust fans and the filters and we're ready to paint. Nathan and Paul painted the new folding chairs for the space. Karen and Adam helped to tidy up the lumber and plastics consumables. Now we can get to scrap lumber and laserable plastics easier! Everyone pitched in to clean up the center of the workshop and open that space back up. So much room for activities! Not pictured: Tons of old dead paint that was dis

Making a Circle Jig

     Have you ever needed to cut a circle? Turns out you can't just freehand that. If you want to cut a circle you need a.... Circle Jig! This handy little thing straps onto a standard router. You stick a pin in one of the little holes for the center, strap a router to the other side and route yourself a circle. Here's a commercial circle jig. Seems simple enough. Now what if you want this thing -Right Now-? Well then you better have a Laser Cutter and some Acrylic. Step 1 of the design comes from measuring out the dimensions of the existing router plate. What are those curved holes for? Who knows? But they look cool right? Starting from a base circle of diameter 1/4 in (size of the router bit) we offset another circle at some whole number of mm to mark the smallest radius we can cut. Then we offset a whole bunch of other circles in 2mm increments. Then add some horizontal lines. We want to place the center holes at intersections of the horizontal lines and ci

Building an enclosure for the LulzBot AO 100

As the cold weather season arrives in Atlanta, with it comes issues with our 3D printers. Specifically problems with temperatures and print stability. Freeside is essentially a big warehouse, and our 3D printing station is setup in the large open area in the front of the space. What this means is that when it is cold in the space, this will affect the printing quality because the ambient temperature is far lower than what is optimal for thermoplastics. The cold ambient air will cause parts to rapidly cool during the middle of a print. And with materials like ABS which can shrink dramatically during cooling, this causes prints to warp, deform, and delaminate during and after printing is finished. The print on the left is showing signs of delamination from plastic cooling mid print. To remedy this, we built an acrylic enclosure for our LulzBot AO-100, which is our dedicated ABS printer. We tested the proof of concept of whether an enclosure would help mitigate printing problem

Using gaze-tracking to map how surgeons look at diagnostic images

A few years ago, a Freeside collaboration resulted in some published medical research on using 3D Printing in pre-surgery planning . In our second collaboration, we used gaze tracking to gather data on how surgeons with different levels of experience look at radiographs when diagnosing hallux valgus deformities. The new paper got published in the current issue of the Journal of Foot and Ankle Surgery . Interestingly enough, we actually came up with the concept for this project during a meetup about interactive art installations. The idea of eye tracking came up and we discussed what we could discover with the technology. So we started to try to figure out how to a study with the free and open-source tools available. We ended up needing: A webcam to look at the user's eyes. ITU Gaze Tracker to calibrate and interpret that data. (However, their website is now down, so I'm not sure how viable this is as part of the toolchain now.) OGAMA - Open Gaze and Mouse Analysis

Build-Out Recap!

A bunch of great stuff got done at the build-out yesterday. A huge thanks to everyone that came out to pitch in! Here are some pictures to recap the projects... Randy's team hung the curtain to the workshop to create more of a barrier between the front of the house and back of the house and to control dust levels a bit more. We'll be finishing the top of the wall soon, but the hard part's already done. Karen, Donald, Tom, Violet, and James framed the doorway to the Media Lab and Bio Lab and hung the door for that area. Next step is AC! Michelle and Mary's team cleaned out project storage and moved the shelves over so that Neils could put the flammability cabinets in that area. That allowed all of us with the help of Adam and Nathan to clean up the workshop and really tidy up. They also sorted out all of the laser cutter raw materials and cut them down to a usable size on the table saw.  For the portal clouds, JW, Nathan, and Kat rolled an aw

Motobrain: Interesting Investigation Concludes

I've had a problem with the way Motobrain calculated current flows for quite some time. Basically it always read a little higher than I expected it to if the textbooks are to be believed. Furthermore, one half the board always read a about 10% higher than the other half. It is not very unexpected that the "textbook" calculation and real life are a bit out of sync. Still, I wanted to know why the error was inconsistent between the two halves of the unit. That part was a bit unusual. Normally, the way you go about solving an issue like this is to exclude stuff until the problem is gone. First, I excluded the Power board, the PCB with all the high current flow, heavy copper, and power transistors (shown right). I did this using the test jig (right, below) I designed to test all the Motobrains that come out of the factory. The MCU board (the board with the sensors, microcontroller, and Bluetooth radio) plugs into the jig and is given a series of test signals to confi