Skip to main content

Something F3 This Way Comes (This Friday)

First Friday Flash Talks, May Edition
10 Presenters | 10 Topics | 5 Minutes Each
(Learning and Debauchery will Ensue)

This Friday, May 7th @ 7:30pm
Free* and Open to the Public
Food, Drinks, and Merriment will be Provided

675 Metropolitan Pkwy, Ste 6066
Atlanta, GA 30310

* ($5 suggested donation per attendee
help keep quality events such as this one happening)




Topics This Month Include...

"Pseudoreplication in Experimental Design"
"Rhythm and Movement in Your Body Part III - Cranial-Sacral Rhythm"
"Coffee Roasting 101"

and many more...

Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and ...

Atlanta Cosplay Meetup: Group Build Update #3

It's been a while since we posted a progress report for the Atlanta Cosplay Meetup's ongoing project, and with Dragon Con right around the corner, we're nearing the finish line. Let's take a look and see what's been going on the last few months! Check out our previous progress reports here: Progress update #1 Progress update #2 Read on to see where we're at now...

What to Do With a Stack of Picture Frames?

When You Have Too Much Free Stuff! Our newest member Raul got his hands on a stack of about 40 picture frames that were being junked. On a general note Freeside tends to discourage large piles of objects randomly appearing as it tends to collect in corners. Raul got permission from our projects team with a time limit of a few weeks. In this case unnecessary, as the membership more or less attacked the pile of boxes and rapidly rendered them into things. Unfortunately starting off all the frames looked something like this: Not terribly useful. We don't even have any idea who these guys are. After a few passes through the planer, however, we get something like this: A perfectly good picture frame useful for stuff. First idea was to push a couple of these through a the laser cutter. Concept good, aim.... Aim was a little off. Also we had just rebuilt the laser computer and electronics so there were a couple of kinks to work out in CamBam's post processor: &nbsp ...