Skip to main content

2 Hacker Cons, 1 Day

Through some crazy scheduling mishaps, two of the south/southeast hacker conventions are set to happen on the same day. The weekend of March 19th will begin CarolinaCon and Outerz0ne, both returning for their 6th year. In recent years the conventions have had talks ranging from embedded malicious javascript, Security Assessment Methodology, learning NMap, Format String Vulnerabilities and even how to travel on the airlines with a firearm.

Local Hacker Cons

For those that have never been to a local hacker convention, it’s completely different than something like DefCon. There are usually only around 80-150 attendees instead of thousands, this allows for anyone to have a 1 on 1 with the speaker if it’s a subject that you’re passionate about and would like further info. This also allows for all the attendees to get to know each other, even though many of us are introverted, after seeing the same people at 2 or 3 cons you end up talking and it’s always easier to talk to strangers when you’re both into technology or Dr. Who. Local Hacker Cons also are done on the cheap, which means the cost is around 20.00 for entry and are set at a cheap hotel, which also helps for the parties (cheaper hotels usually don’t freak out when the beds are pulled out of one room and placed in another to make room for a party).

Call for Speakers

To get ready for the March 19th cons, both CarolinaCon and Outerz0ne are looking for speakers to volunteer to do an hour talk. These talks can be on a project you’re working on, technology you’ve been studying or working on or just a “how to” on something you think others would be interested in. If you’ll be in North Carolina (Raleigh area) and would like to be a speaker at CarolinaCon, visit http://www.carolinacon.org to register to be a speaker. If you’ll be around Georgia (Atlanta area) and would like to speak at Outerz0ne, watch http://www.outerz0ne.org for more info.

Remember that speaking at a local Hacker Convention will bring you minimal fame, glory, possible notoriety and mad props from all the staff and attendees. Maybe even a free t-shirt!

Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and

Freesiders Hackers Collaborate in Medical / Surgical Research

Published in the May issue of the Journal of Foot and Ankle Surgery : " A Novel Combination of Printed 3-Dimensional Anatomic Templates and Computer-assisted Surgical Simulation for Virtual Preoperative Planning in Charcot Foot Reconstruction ." This collaboration of specialties represents an undertaking by members of Freeside Atlanta , Southern Arizona Limb Salvage Alliance , and The Podiatry Institute .  Charcot foot reconstruction remains on of the most challenging procedures in foot and ankle surgery.  These procedures are often lengthy procedures which can be riddled with complications. With the help of Freeside Atlanta Members, institutional researchers used open source Osirix Image viewer and 3D Software such as Newtek's Lightwave or Blender to create simulated surgical reductions as well as 3D printed templates.  Freeside Atlanta members assisted in providing 3D printing solutions and know-how to the project. Experimental test prints were done on a M

Onboard Firmware of the Human Brain

Freesiders are continually tinkering with robotics and other such machinery .  Many of these embedded processors and firmware are becoming open source and every-more diversified in the wake of the modern Maker movement . One notable boost to the hackerspace arsenal is the Arduino (an like platforms).  This offers designers an incredible power to devise not just individual devices but even the emergence of complex, integrated systems . This evolutionary pace of modern technological systems may be significantly faster the biologic system development, but there may be a few well learned tricks yet to be mastered.  It seems that studying how nature has managed to solve many development challenges will aid in designing robotics, where efficiently counts just as much. One  challenge, that is particularly interesting, is data processing.  Artificial intelligence is labored with processing data and producing a meaningful and useful output.  When considering the increase in sensory