What is Freeside?

Freeside is a Georgia nonprofit corporation, organized to develop a community of coders, makers, artists, and researchers in order to promote collaboration and community outreach. Learn more »

Magnets and Geometry

A bunch of us are in the middle of a short fad of fascination with magnets. I recently purchased about a thousand gold-plated spherical 6mm N35 neodymium-iron-boron magnets from Edwin Science. These are strong enough that swallowing two of them would probably require surgery. But I am not dumb enough to eat them, being far more interested in building things out of them, and thus I give you some photos of the nifty things I did when I got them, and some tips on how to assemble them. I regret not having the artistic skills or patience to illustrate all of the information I want to share here, but hopefully those interested can follow along.

The first building block is a loop of magnets, with the poles aligned circumferentially (that is, a string of aligned magnets joined end to end). In the photos below, anywhere you see two parallel rows of magnets arranged in a square configuration, that indicates the adjacent rows are aligned in opposite directions, and almost always part of separate loops. If the rows are arranged in a triangular configuration, that indicates they are aligned in the same direction. The loops can be treated as polygons (squares, pentagons, hexagons, octagons, etc) to create polyhedra. The strength of the magnets causes them to exert force in the direction of perfect alignment, which gives rigidity to what would otherwise be flexible circles.

Truncated OctahedronOctahedronOctahedronGreat RhombicuboctahedronCuboctahedronDodecahedronDodecahedronDodecahedronDodecahedronDodecahedron, truncated

Two or more loops of the appropriate relative size can be stacked to form a shape somewhere between a cone and a pyramid. 5-10-15-20 makes a pentagonal pyramid, 4-8-12-16 makes a square pyramid, 6-9-12-15 (a "loop" of 3 magnets is not stable) makes a triangular pyramid. For reasons related to the bulk of the individual spheres, the triangular pyramid is too tall and too circular to be of much use, which is unfortunate since a triangle is by far the most useful shape for building polyhedra. The square pyramid is better, but far less useful. This leaves the pentagonal pyramid as the building block of choice for a large number of assemblies. Each "pyramid" can be assembled from as few as two to as many as four concentric rings (a fifth ring results in most structures being too heavy to support their own weight... until I get some N52 spheres!). Each layer can be "up" or "down", so you may get a rippled surface instead of a cone shape, and the entire resulting shape can be installed into the final product pointing out or in. Also of note is that the pyramids have a "handedness". Where the rings can be simply flipped over if they are out of alignment, the pyramids have to be inverted if you need to flip them.

15-magnet Pentagon UnitDodecahedron, inverted pyramid faces, assemblyDodecahedron, inverted pyramid facesDodecahedron, offset pyramid facesTwelve Pentagon EggSix Pentagon CylinderDodecahedron, pyramid facesDodecahedron, pyramid facesDodecahedron, pyramid facesDodecahedron, pyramid faces, interior mountingTwelve Pentagon RingTetrahedronDodecahedron, pyramid faces, interior mountingRhombic Prism

Mystery Unboxing

We recently received our second order of Surprise Boxes and Display Assortments from Electronic Goldmine, and again we made a group activity out of unboxing and sorting the parts. Afterward I combined all the sorted containers from previous unboxings, both Freeside's and my own, and started categorizing things.



The take this time was similar to last time. We got a lot of VFDs from the display assortments, which we can't use right now due to lack of a good cheap easy-to-reproduce 30-40V AC power supply, but those will be much fun later. We went with the "Super" (medium size) surprise boxes this time, to get more densely packed smaller components and less larger sparse items like the security hardware and R/C cars for last time. The choice parts this time included some high voltage relays, two-prong AC outlets, a bunch more 96x64 LCDs, a few dozen dual RJ45 jacks, some 10-segment LED bar graphs, and a lot of nice trim and dual-log pots. The bulk of the order was once again capacitors.

We are going to take a break before the next order, probably 2-3 months, so that they can cycle through their stock and hopefully provide a bit more variety next time.

Hack-a-Thon Nov. 21, 2009

I know I'm late getting around to posting these pics from the Hack-a-Thon that freeside participated in on Nov. 21, 2009, but got some pics from the projects I worked on.

Here are some pics from the social side of the Hack-A-Thon:











This is a quick project I did to make a hook system for my dogs food/water bowl so she didn't tip it over while in her crate.




















And this is some pics from my model rocket engine project. More details can be found at: www.shadow404.com/125

A project of light proportions


Taopunk was spotted last night working on a very intresting project. Can you non-freeside members figure out what it is??? Hmmm...
Click on the picture to see a larger image.
First guest to figure it out will win a Freeside T-shirt and sticker.