Skip to main content

Atlanta Mini Maker Faire - Learn to Solder - Call for Volunteers

It's about time for Atlanta Mini Maker Faire 2013 (10/26). LearnToSolder.org and Freeside Atlanta are once again hosting a free Learn to Solder tent. Last year's tent was a huge success, teaching around 100 kids (aged 4 to 80) how to solder together a basic electronic kit. This year, we hope to double that number, but we need help!

We've got all the supplies, irons, solder, project kits, helping hands, band aids and burn gel. What we need are volunteers to supervise and mentor the kids in constructing the kits. These kits are simple, and designed for first timers, but gives them something they can be proud of and show off. You're there to help troubleshoot (solder bridges, cold joints), teach (show them how to do the first joint), and supervise (make sure they know which end of the iron is the hot one), etc.

Sign up for a shift (as many as you want!) today!
https://docs.google.com/spreadsheet/ccc?key=0Ah20TrVBysxUdGVKSHd5a0VDV183UEJWamhSX1ZVNlE&usp=sharing

Information about the AMMF: http://makerfaireatl.com/

This years Learn to Solder kit: http://www.makershed.com/Learn_to_Solder_Skill_Badge_Kit_p/mkls01.htm

Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and ...

Atlanta Cosplay Meetup: Group Build Update #3

It's been a while since we posted a progress report for the Atlanta Cosplay Meetup's ongoing project, and with Dragon Con right around the corner, we're nearing the finish line. Let's take a look and see what's been going on the last few months! Check out our previous progress reports here: Progress update #1 Progress update #2 Read on to see where we're at now...

Build Out 12-5 Photo Recap

Freeside just finished our Build Out for the end of 2015 and we got a lot of work done. Let's see what all we accomplished.