Skip to main content

Thingiverse: Anatomic Human Foot

Freesider's are evermore professional printistas of sorts.  As our sprints are ramping up, there seems to be a growing interest in "organic modeling".  Things often found in nature fall into this category for CAD artists.

Here is a recent Thingiverse upload, which was made from some very simple modeling techniques in Newtek's Lighwave 3D application.  A little goes a very long way, indeed.




per Thingiverse.com:
There are 26 proper bones in the human foot; 28 if you consider the sesamoids of the 1st metatarsal phalangeal joint complex. That's over 25% of your body's total musculo-skeletal anatomy, hitting the ground every time you go for a walk or run! Quite impressive, really.

Read More:
en.wikipedia.org/wiki/Foot
learnbones.com/foot-bones-anatomy

This anatomic foot model was designed in Newtek's Lightwave 3D, as part of the podcast @ YouTube.com/DrGlassDPM

Anatomic study models can be quite expensive, search.anatomywarehouse.com/search?keywords=foot&x=0&y=0 so I wanted to share my printable version with the Thingiverse crowd and give a big shout out to Freeside Atlanta's Hackerspace!

Instructions

I've included the individual bones with a straightforward naming convention. These parts will be replaced, as I continue to add more detail and such; for now, enjoy!

Additionally, there are FootBones.stl and FootSkin.stl, for those of you Duel Extruding.

Otherwise, I'd be impressed to see some of the techniques towards printing this and having a clean separation from support material. This (and deriviatives thereof) will hopefully rival things like: molded study models search.anatomywarehouse.com/search?keywords=foot&x=0&y=0
-Nick

Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and ...

Atlanta Cosplay Meetup: Group Build Update #3

It's been a while since we posted a progress report for the Atlanta Cosplay Meetup's ongoing project, and with Dragon Con right around the corner, we're nearing the finish line. Let's take a look and see what's been going on the last few months! Check out our previous progress reports here: Progress update #1 Progress update #2 Read on to see where we're at now...

Build Out 12-5 Photo Recap

Freeside just finished our Build Out for the end of 2015 and we got a lot of work done. Let's see what all we accomplished.