Skip to main content

Next Buildout March 3!

Next buildout is scheduled for March 3, 10:00 AM - 6:00 PM. For those not in the know, Buildout is when Freeside's members get for the purpose of making the space better, socializing, and eating food. Incidentally non-freesiders are more than welcome to show up, help, socialize, and then *maybe* become members afterward. Buildout's a great time for anyone to show they care for the space.

If you have an idea for what needs worked on, please add it to the task list here:
https://sites.google.com/site/freesideatl/build-out/to-do

If you need something for said task, such as a ladder, please feel free to add it to the list here, and we'll try our best to see it shows up.
https://sites.google.com/site/freesideatl/build-out/shopping-list

Incidentally you might notice that many of these items don't have a responsible person. If you can please try to take ownership of at least one task. If you don't know what the task involves, it's possible no on else does either. Take it anyway, and ask the list for advice!

If you have any questions, please feel free to ask one of the officers directly (so as not to spam the list) or to ask the list.

See you there!

Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and ...

Atlanta Cosplay Meetup: Group Build Update #3

It's been a while since we posted a progress report for the Atlanta Cosplay Meetup's ongoing project, and with Dragon Con right around the corner, we're nearing the finish line. Let's take a look and see what's been going on the last few months! Check out our previous progress reports here: Progress update #1 Progress update #2 Read on to see where we're at now...

Build Out 12-5 Photo Recap

Freeside just finished our Build Out for the end of 2015 and we got a lot of work done. Let's see what all we accomplished.