Skip to main content

Sunday Sunday Sunday! Oxy/Acetylene Welding

By
This Sunday Matt will be teaching us Oxy/acetylene welding. OFW is nearly "obsolete" welding process but it teaches the basic hand motions & filler rod manipulation skills necessary to learn TIG.

We can handle 3 people at most because We only have one rig and you'll have to take turns using it. (plan on spending at least 4 hours at the space). If you want to learn TIG, this is your ticket in. Anyone who can show proficiency in O/A welding on thin sheet is welcome to use the Dynasty.

In order to keep the class available at no fee, We ask that you please bring your own materials - clean 12,14,or 16 gauge mild steel sheet or tubing is preferred (scrap is fine, clean sheet is available in small qty at any Lowes or Home Depot).RG45 filler rod will be provided.

Same dress requirements as last class:
Cotton/ flame retardant clothing (no nylon, polypropylene, rayon etc.)
One Tee shirt
One long sleeve shirt or welding jacket
Long pants (no shorts, kilts, dresses, Speedo thongs etc.)
Closed toe footwear (no sandals)

IF YOU ARE NOT SURE YOU CAN SHOW, PLEASE DO NOT SIGN UP.

Suggested Donations for the class at $15-20.
Labels:

Comments

  1. tonyw1July 6, 2010 at 10:49 AM

    Hello. I just joined the group. Is the welding workshop an on-going class, or was it a one-time workshop? If on-going, when is the next one?

    Thanks.

    ReplyDelete

Post a Comment

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

By
Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and ...
Post a Comment
Read more

Atlanta Cosplay Meetup: Group Build Update #3

By
It's been a while since we posted a progress report for the Atlanta Cosplay Meetup's ongoing project, and with Dragon Con right around the corner, we're nearing the finish line. Let's take a look and see what's been going on the last few months! Check out our previous progress reports here: Progress update #1 Progress update #2 Read on to see where we're at now...
Post a Comment
Read more

Build Out 12-5 Photo Recap

By
Freeside just finished our Build Out for the end of 2015 and we got a lot of work done. Let's see what all we accomplished.
Post a Comment
Read more