Freeside Atlanta

I built a pick and place machine so I could build up my Motobrain project easier. I used MDF for the platforms. 12mm rail and linear bearings for the Y and Z axis bearings. THK linear motion guide for the X axis. The Z axis is a piece of carbon fiber tubing attached to a piece of laser cut acrylic. The nipples on the tube are 3D printed.  The laser cutting was done by OSHStencils.com. The bearings were purchased at Amazon. The 3D printing was done by approto.com.

Everyone seems to either want, have or use a 3D printer now a days. I bought my first printer kit in 2012 and I quickly noticed I wanted a one with more capabilities but since all of the high performance models were so expensive I designed my own. Eventually I designed a $4,000 printer that I could sell for $1,400 on KICKSTARTER . There were a few things that I wanted the printer to have: two nozzles, Bowden extrusion, enclosed build area, and a moving xy gantry.  The two nozzles seems like an obvious choice for anyone who has printed before simply because it allows you to create way more interesting prints than you could otherwise. For example dissolvable support, multiple colors and multiple materials (which is pretty cool). I did notice on other dual nozzle printers, however, that having two big stepper motors created a massive moving mass so if I wanted any sort of respectable speed I was going to have to go Bowden style. Another pet peeve I have is

I purchased one of the new FLIR E4 thermal imaging cameras  (TIC) a couple weeks back because I am working on a new project called Motobrain . It is an automotive power distribution unit with a nominal current capacity of 100A. For those not in the know, 100A is a TON of current! Because this project is designed to move so much current and will be small I need to understand its thermal characteristics very well. To that end I've been operating the device and taking measurements. What I found is that I just could not get the kind of detail I wanted. The reason is that the resolution of the  microbolometer  in the FLIR E4 is not very high and the lens does not allow you to get very close to the device under test (DUT). The means that you cannot just zoom in after you take a photo either. So, what is a person to do if they want to take a macro photograph with a consumer grade TIC? Go to Amazon.com of course! I purchased a Gallium Arsenide (GaAs) lens meant for a CO² laser for about $4

I (Ben Bradley) have made several of these for my personal use. My early bookcases were three feet wide, but moving was a process of putting books into boxes, moving the shelving and the boxes, and putting the books back on the shelves. It was unknown whether the bookcase would hold together if tilted while fully loaded, because it was too heavy to pick up when fully loaded This one was assembled at Freeside after the November 5 Open House and is based on my current design, as follows: Components used (available at any Home Depot or Lowes): (4) 1" x 8" x 6 ft pine board (actual measurements 3/4" x 7 1/4") (1) 4 ft by 8 ft. x 1/4" plywood board. (48) 2" long wood or drywall screws, coarse thread preferred (about half of a 1 lb box) (30) 1" long wood or drywall screws, coarse thread preferred (about a tenth of a 1 lb box) Tools used: Chop saw, table or circular saw, hand sander, electric drill/electric screwdriver (two preferred, one for

Some of you may have seen our most recent monster creation at Alchemy or Atlanta Mini Maker Faire - The Infinity Portal. The Infinity Portal is a 10 foot tall archway with a 7 x 4 ft infinity mirror inside of it. The mirror is made with two-way acrylic, so you can push on it to warp the effect for people on either side of it. It is lit with addressable LEDs, so there is a counter-rotating rainbow vortex in there too. You may remember seeing our write-up about prototyping the design a few months ago. Defying all expectations, the thing actually survived both events that we brought it to! So we're really happy with it and will find a place to keep it in the mean time. We actually (surprisingly) did a pretty good job of documenting this build, so we cut it together into a video to show how we built this huge, epic piece of art. Enjoy!

Again with the weekly (more or less...) list of delectable offerings by Freeside, your friendly local dragon and hamster breeder. Sunday, 10/20: Freeside Laser: Basic Usage and Safety at 2pm Learn how to use Freeside's new Laser Engraver/Cutter ( wiki page ). You'll learn how to use the software toolchains to cut or engrave vector and bitmap artwork into a variety of materials. And after the class, you'll be eligible to schedule a one-on-one session an approved user to supervise and assist with your first project, and thereby gain authorization to use the laser unsupervised. That's right. Just you and the laser. $40/person. Pay on Meetup. Tuesday, 10/22: Chump Car Build at 7pm Ever wanted to race a car, build a moving art project, or learn to work on a car? Here is your chance to do one or all three! Please join us at Freeside to learn more! And it's totally free, man. And simultaneously... Tuesday, 10/22: Open House at 7:30pm Where the house is open,

Step right up, ladies and gents!  Never seen such fine taxidermy before?  The best in all the land! I see a lot of disappointed faces - you there, reading the article!  You some kind of Internet-dwelling, city slicker?  Oh, you are.  Very well then - that's totally not  a problem!  What's that you say?  What's going on?! Welcome to the Trading Post - tales from the wild and unsane  world of hackerspace skills trading. One of the key benefits to being part of a community of skilled people with diverse backgrounds is that you're surrounded by opportunities to try something new and learn from each other. Whether you're into taxidermy, python, arduinos, or rebuilding arcade machines, you can leverage your skill set to learn new skills from other hackerspace members.  If you successfully find a match, then that's what we at Freeside call The Gift of the Magi moment.  Cherish it. This week, I promised Paul I'd get his website hosted and up and runnin