Skip to main content

Atlanta Cosplay Meetup: Group Build Update #1

The Atlanta Cosplay Meetup is a bi-monthly-ish group of cosplayers, prop builders, and costume makers hosted at Freeside Atlanta. We have been meeting since October 2014 to share ideas and projects.

In November we began discussing an idea about making a group costume - something we could all work on, and eventually wear, together - and how we could make that into a reality. After a lot of debate (and a little help for Rachel who had already made her own Xenomorph costume!) we settled on making a Colonial Marines and Xenos group from the Aliens franchise.

We just recently wrapped up our 3rd group build, so let's recap what we've done so far.



Our first build we focused on planning and various ideas of what we wanted to do and how we wanted to get there. We decided to use Pepakura to laser cut cardboard as the rough master for our Marine's armor, and to 3D print some of the detail parts as well as their various weapons.

Pepakura is a program that takes a 3D object and lays it out into 2D faces. The example I like to use for this is creating a a paper craft cube. You can lay out the 6 faces of a cube on a sheet of paper, cut the lines, score and glue tabs, and at the end you have your cube in the real world.

This concept scales up to infinitely complex objects. Cosplayers have been using Pepakura for over 15 years now to create complex suits of armor and props. What I discovered is that Pepakura can export into a format that Freeside's laser cutter can interpret, which turns hours of cutting material into mere minutes.




For our second build, we began laser cutting parts for the Marine torso, starting with the chest. The parts were exported from Pepakura into the laser cutter's software, which was then cut out of cardboard. By dialing in different settings for "cuts" and "scores", we can complete everything in a single job. After about 20 minutes we had all of the pieces cut out and began assembling!

Assembly consists of using hot glue to glue the seams of the cut together. We glue the edges on the inside of the cardboard armor to make sure it keeps it's shape, but this creates big gaps between parts on the front. This won't be a problem for us, since we will be sculpting details and smoothing out the form later on in the project.


For our most recent build, we started applying fiberglass resin to the chest piece. This is used to strengthen the armor so that we can sculpt on it with bondo body filler. While the chest was curing, we began cutting and assembling the back armor. Adam also started 3D printing the Pulse Rifle, which should be ready to clean up and assemble at the next build day.

Rachel also brought her Xeno costume so we could brainstorm ideas on how to create the next version of that. Kevin, our other Xeno, and Rachel and I decided we will cut the Xeno skull out of cardboard stacks for the rough master, which they will harden and sculpt.





Our next build will see a lot of progress, since we are now at a point where we can have teams of people working on different smaller parts. We will cut out and assemble the leg armor, start bondo sculpting on the chest, and fiberglass and bondo the back. We'll also be working on the Pulse Rifle, and may have some of the other Marine weapons to start 3D printing. Our team of Xenos will work on the cardboard jigsaw puzzle.

See all of our progress photos on Freeside's Facebook page here: https://www.facebook.com/media/set/?set=a.1045223078825003.1073741829.612557732091542&type=1

Be apart of the Atlanta Cosplay Meetup by keeping an eye on Freeside's Meetup calendar, or our Facebook group here: https://www.facebook.com/groups/AtlantaCosplayMeetup/

Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and

Freesiders Hackers Collaborate in Medical / Surgical Research

Published in the May issue of the Journal of Foot and Ankle Surgery : " A Novel Combination of Printed 3-Dimensional Anatomic Templates and Computer-assisted Surgical Simulation for Virtual Preoperative Planning in Charcot Foot Reconstruction ." This collaboration of specialties represents an undertaking by members of Freeside Atlanta , Southern Arizona Limb Salvage Alliance , and The Podiatry Institute .  Charcot foot reconstruction remains on of the most challenging procedures in foot and ankle surgery.  These procedures are often lengthy procedures which can be riddled with complications. With the help of Freeside Atlanta Members, institutional researchers used open source Osirix Image viewer and 3D Software such as Newtek's Lightwave or Blender to create simulated surgical reductions as well as 3D printed templates.  Freeside Atlanta members assisted in providing 3D printing solutions and know-how to the project. Experimental test prints were done on a M

Onboard Firmware of the Human Brain

Freesiders are continually tinkering with robotics and other such machinery .  Many of these embedded processors and firmware are becoming open source and every-more diversified in the wake of the modern Maker movement . One notable boost to the hackerspace arsenal is the Arduino (an like platforms).  This offers designers an incredible power to devise not just individual devices but even the emergence of complex, integrated systems . This evolutionary pace of modern technological systems may be significantly faster the biologic system development, but there may be a few well learned tricks yet to be mastered.  It seems that studying how nature has managed to solve many development challenges will aid in designing robotics, where efficiently counts just as much. One  challenge, that is particularly interesting, is data processing.  Artificial intelligence is labored with processing data and producing a meaningful and useful output.  When considering the increase in sensory