Skip to main content

What to Do With a Stack of Picture Frames?

When You Have Too Much Free Stuff!

Our newest member Raul got his hands on a stack of about 40 picture frames that were being junked. On a general note Freeside tends to discourage large piles of objects randomly appearing as it tends to collect in corners. Raul got permission from our projects team with a time limit of a few weeks. In this case unnecessary, as the membership more or less attacked the pile of boxes and rapidly rendered them into things.

Unfortunately starting off all the frames looked something like this:

Not terribly useful. We don't even have any idea who these guys are. After a few passes through the planer, however, we get something like this:

A perfectly good picture frame useful for stuff. First idea was to push a couple of these through a the laser cutter. Concept good, aim.... Aim was a little off. Also we had just rebuilt the laser computer and electronics so there were a couple of kinks to work out in CamBam's post processor:

 

Instead of getting distracted by that rabbit hole of troubleshooting, though, Nathan, in a process pioneered at Freeside by Mr. Ferguson, took a few frames and burnt some Lichtenberg figures. The actual process is pretty straightforward. Soak some wood in saltwater, hook a microwave oven transformer to the wall up backward, and poke the scary ends into the wood. There's some insulation and other safety jazz that I'll leave to: Google.

The raw frames come out a little (a lot) sooty and salty and need cleaned up:

Sanding and staining, or painting, plus a layer of polyurethane gives these:



But Wait. there's More!

Before the rest of the membership got ahold of those picture frames, Raul had intended on making a stool. We actually had a broken branded stool lying around to use for parts. The next day he was working on putting the stool together. After some disassembly, sanding, nails and whatnot:

A wild stool appears!



The Final Product


Comments

Popular posts from this blog

A Capacitive-Touch Janko Keyboard: What I Did at the 2017 Georgia Tech Moog Hackathon

Last weekend (February 10-12, 2017) I made a Janko-layout capacitive-touch keyboard for the Moog Werkstatt at the Georgia Tech Moog Hackathon. The day after (Monday the 13th), I made this short video of the keyboard being played: "Capacitive Touch Janko Keyboard for Moog Werkstatt" (Text from the video doobly doo) This is a Janko-layout touch keyboard I made at the 2017 Moog Hackathon at Georgia Tech, February 10-12. I'm playing a few classic bass and melody lines from popular and classic tunes. I only have one octave (13 notes) connected so far. The capacitive touch sensors use MPR121 capacitive-touch chips, on breakout boards from Adafruit (Moog Hackathon sponsor Sparkfun makes a similar board for the same chip). The example code from Adafruit was modified to read four boards (using the Adafruit library and making four sensor objects and initializing each to one of the four I2C addresses is remarkably easy for anyone with moderate familiarity with C++), and

Freesiders Hackers Collaborate in Medical / Surgical Research

Published in the May issue of the Journal of Foot and Ankle Surgery : " A Novel Combination of Printed 3-Dimensional Anatomic Templates and Computer-assisted Surgical Simulation for Virtual Preoperative Planning in Charcot Foot Reconstruction ." This collaboration of specialties represents an undertaking by members of Freeside Atlanta , Southern Arizona Limb Salvage Alliance , and The Podiatry Institute .  Charcot foot reconstruction remains on of the most challenging procedures in foot and ankle surgery.  These procedures are often lengthy procedures which can be riddled with complications. With the help of Freeside Atlanta Members, institutional researchers used open source Osirix Image viewer and 3D Software such as Newtek's Lightwave or Blender to create simulated surgical reductions as well as 3D printed templates.  Freeside Atlanta members assisted in providing 3D printing solutions and know-how to the project. Experimental test prints were done on a M

Onboard Firmware of the Human Brain

Freesiders are continually tinkering with robotics and other such machinery .  Many of these embedded processors and firmware are becoming open source and every-more diversified in the wake of the modern Maker movement . One notable boost to the hackerspace arsenal is the Arduino (an like platforms).  This offers designers an incredible power to devise not just individual devices but even the emergence of complex, integrated systems . This evolutionary pace of modern technological systems may be significantly faster the biologic system development, but there may be a few well learned tricks yet to be mastered.  It seems that studying how nature has managed to solve many development challenges will aid in designing robotics, where efficiently counts just as much. One  challenge, that is particularly interesting, is data processing.  Artificial intelligence is labored with processing data and producing a meaningful and useful output.  When considering the increase in sensory