I've had a problem with the way Motobrain calculated current flows for quite some time. Basically it always read a little higher than I expected it to if the textbooks are to be believed. Furthermore, one half the board always read a about 10% higher than the other half. It is not very unexpected that the "textbook" calculation and real life are a bit out of sync. Still, I wanted to know why the error was inconsistent between the two halves of the unit. That part was a bit unusual. Normally, the way you go about solving an issue like this is to exclude stuff until the problem is gone. First, I excluded the Power board, the PCB with all the high current flow, heavy copper, and power transistors (shown right). I did this using the test jig (right, below) I designed to test all the Motobrains that come out of the factory. The MCU board (the board with the sensors, microcontroller, and Bluetooth radio) plugs into the jig and is given a series of test signals to confi
A diverse group of coders, makers, artists, scientists, system security researchers creating a hacker/maker space in Atlanta Georgia. We create new and exciting projects using diverse knowledge and teach free classes on a multitude of topics for the general public.